Belt drying machine Introduction
The strip dryer is a large number of continuous drying equipment for production, which is used for drying the dryness of the piece, strip, granular and partial paste material with better air permeability. It is particularly suitable for dehydrated vegetables and Chinese medicine slices such as high moisture content. It has the advantages of high drying rate, high evaporation strength, and good product quality. The application of a band dryer is very widely used in industries, mainly used for dry small pieces of materials and fiber materials. In short, the drying material with a band dryer must have a certain shape, and it still maintains a certain shape after drying.
1. Safety operating procedures for band dryers
(1) When the material is dry, check whether some power supply wires are damaged in advance. If there is any timely treatment, or replacement, avoid accidents or dangers.
(2) The materials cannot fall into the heating pipe, so as not to burn the motor or fire.
(3) The drying temperature should be set reasonably and correct, and cannot exceed the scope of this regulation.
(4) The operator cannot touch the power switch wet to the power switch to avoid electric shock.
(5) After the tape dryer work is over, the device should be turned off immediately.
2. Safety precautions for band dryers
(1) The operator should wear labor protection supplies before work. When the device is running, you cannot directly contact the valve, body, etc. to avoid being burned.
(2) The operation of the belt dryer should be normal. The fuselage should run smoothly. The main axis should pay attention to whether there are bending and deformation. If there is, the device cannot be used.
(3) The equipment can be stopped after the equipment is cooling to the shutdown temperature.
(4) The rotating part of the body cannot be exposed during operation to avoid danger.
Performance characteristics
◎ You can adjust the amount of air, heating temperature, material residence time, and feeding speed to achieve the ideal drying effect.
◎ The equipment is flexible, and the rinse of the rinse and material cooling system can be used.
◎ Most air circulation is used, saving energy.
◎ The unique winding device makes the hot air distribution more uniform to ensure the consistency of product quality.
◎ The heat source can be supported by steam, heat conductive oil, electricity or coal -fired (oil) hot air furnace.
Product Tags:
|
|
Stainless Steel 316L Strip Dryer For Flakes, Strips, Granular And Paste Materials Images
|
